invisible air

Distinguished Professor Lidia Morawska,  showed me a demonstration with 2 glass Sauerkraut jars.

We also have a CO2 meter. This is the CO2 concentration  in the office.

 

The gas we live in is invisable, the composites are invisible. The only time we see air ‘quality’ is when its really bad, such as smoke from bushfires and factory smog.

 

Both jars are sealed and look identical.

Open and read the contents of one with the CO2 monitor. One is the same as the office. 885.

 

The other is 5713.

Beforehand one of the jar had  2 human breathes exhaled into  it before sealing.

They contain totally different mixtures of  gas and we cannot tell which is which without measurement.

As Prof Morawska say’s you can see if the water is cloudy, and this means some form of water pollution or similarly for noise and light pollution, but air quality cannot been seen.

 

 

 

UV-c Light that cleans

 

Air can be sanitised with UV. 222nm 

UV-C UV light is use to kill pathogens in the atmosphere- The safest and effective wavelength of light is 222nm.

A nanometer is equivalent to one billionth of a meter.

 

Most acrylic plastics will allow light of wavelength greater than 375 nm to pass through the material, but they will not allow UV-C wavelengths (100–290 nm) to pass through. Even very thin acrylic sheets of less than 5 millimeters (mm) do not let UV-C light penetrate. 

You see this with the LED uv lights in Hand dryer, sanitising stations and installed in air-conditioning systems. This use of colour to sanitise is interesting and that is transcends the merely visual and have this ‘colour’  reach out to something more tangible and powerful. 

The UV also makes white ‘glow’ purple. So this colour of purple, deep blue, black light, is interesting in an aesthetic sense. If the inhaling bags are white with perhaps UV LED in side this would  to give a ghostly, jelly appearance in darken space.

Ive read some papers talking about the effectiveness of the UV light bug zappers as a sanitiser. Some research suggests its just as effective against air board pathogens such a s SARS and COVID 19. There is also the idea that the UV-C, along with making Ozone gas, there could be other negative chemical reactions with other air-born particles, its suggested that perhaps from off-gassing painting or new furniture, UV-C could generate another compound.. As the nature of air and atmosphere is so ephemeral and constantly in flux, with a myriad of different combination of things that could be in a room., it seems very hard to test.

 

 

 

 

This old and well established technology was first successfully used in classrooms in the United States in the 1930s to lower the risk of airborne spread of measles22 — known as the most infectious disease until the Delta variant of SARS‐CoV‐2 surpassed it. This technology (UV‐C 254 nm) does not generate new pollutants in the air; is silent, robust (low maintenance) and low cost; has low energy requirements; and is already covered by international and Australian standards (AS/NZS IEC 62471:2011) as well as workplace safety standards.23 Its extension to far UV radiation (222 nm), which does not penetrate the skin, opens greater opportunities for use, and if utilised in shared spaces, it could be doing to air what is done to water — every drop of water we drink is disinfected.

 

Since 254 nm UVC harms exposed human tissues, it can only be used to sanitize empty rooms. But 222 nm UVC can be a promising disinfection system for occupied public spaces including hospitals where nosocomial infections are a possibility.

 

 

actions are based on the above – a focus on venation, circulate and sanitation.

 

G/

https://youtube.com/shorts/zU_gAOhICi8?feature=share

 

https://youtube.com/shorts/zU_gAOhICi8?feature=share

 

Combining movements. materials and action testing.

Multiples of movement.

enhance complexity

matrix of actions

actions interaction

actions to circulate air.

ventilate

breath in breath out filter

F/

Inhale

building that breathes

exhale

 

test for air breathing and cleaning mechanism-

 

https://youtube.com/shorts/TAWFG74MKuU

 

https://youtube.com/shorts/G57OBKkhUS0?feature=share

 

Firsts tests with a breathing mechanism. ‘Floating’ bags inflate and deflate, breathing the air in and out. The mechanisms could interact with themselves. Multiples,   hung up high, close to the ceiling.

This is where the air we exhale gathers. The warm air rises and concentrates. (note*  lower ceilings lights in new housing snd apartments means that the collective warm air (breathes) along with pathogens is closer to the headspace and more likely to spread infection)

Air filtering to be incorporated into the ‘bag’ – ‘Lug’ to capture and clean ‘breathes’. The mechanism is adaptable to be passive , not driven by and electrical motor, (although this could be powered by solar) a wind turbine with rotating shaft could penetrate the ceiling of a build so that the action was totally power neutral, powered by wind. 

 

 

 

 

 

A/

Lidia’s international advocacy pieces –——————————————

Some of Lidia’s article for The Conversation: https://theconversation.com/profiles/lidia-morawska-428572/articles

Some others to read:

The Channel 7 extract on QLD schools: https://www.youtube.com/watch?v=llSFA7qft-g

Buildings that Breathe: https://www.brisbane.qld.gov.au/planning-and-building/planning-guidelines-and-tools/neighbourhood-planning-and-urban-renewal/new-world-city-design-guide-buildings-that-breathe

VENT study

Breath the Building

Start—-

HOST– 1 —

with

Human Building Interaction research group (QUT) / Dr Anna Tweeddale

Human-Building Interaction (HBI) is an interdisciplinary area of research that includes architecture, building science, ubiquitous computing, and interaction design. It lays at the intersection between comfort research from building science and human-computer interaction.

HBI considers users as completely immersed in an interactive object which is the building. The building influences users’ experience through multiple channels (heat, light, sound, space, and views). Users interact with the building to have better experiences, and their interaction could have repercussions at different scales, for example, in the operation of blinds to block natural light and increase energy consumption. With the increasing use of ambient intelligence for automatization, HBI approaches can help create new forms of interactivity for climate and human adaptive environments.

 

HOST– 2–

ARC Training Centre for Advanced Building Systems Against Airborne Infection Transmission.

 

with

International Laboratory for Air Quality and Health (QUT) / Prof. Lidia Morowska

Centre Aims

The aim of the Centre is therefore to design and develop a building system whose elements work together to reduce indoor airborne infection transmission by improving indoor air quality (IAQ) and at the same time maintaining comfort and energy efficiency.

The specific objectives of the Centre are:

  • Developing human capacity in building and controlling intelligent building systems to ensure clean air and clean energy, through training and education of industry professionals. These professionals include architects, civil and mechanical engineers, facilities managers, and building system component manufacturers.
  • Conducting applied research in multi-parameter optimization and using novel technologies in the context of Australian building designs and intelligent building systems.
  • Improving quantitative assessment of the efficacy of building systems and their components for IAQ improvement through state-of-the-art simulations and innovative physical testing methods.
  • Designing solutions and recommendations for naturally and mechanically ventilated buildings to lower the risk of infection transmission to acceptable levels within the overall context of the building system.
  • Translating knowledge and innovation for the building sector through collaboration and engagement with partner organizations and the Advanced Manufacturing Growth Centre (AMGC).

Project description:

‘Aerosol’ will creatively explore how art might provoke new thinking about living in, and interacting with, buildings and their indoor atmospheres. Informed by state-of-the-art science and technologies for monitoring air quality, as well as ventilating/filtrating indoor environment, ‘Aerosols’ will produce DIY experiments in kinetic, immersive, and interactive art.

 

 

Recipient of ANAT Synapse Residency 2023